신규 상품 정보
상품 정보 등록
  홈 > 마켓플레이스 > 상품정보  > 공구,기계류 >

(주)삼신기계
(주)삼신기계 (한국) 회사에서 14개의 상품을 찾았습니다. (1~14 / 총 14 건)   
 
선택하시고 클릭하세요.
모두선택  |  선택해제
 
Uncoiler

Uncoiler
Manual Type Mandrel Type Cone & Chuck Typ Mechanically there are 2(tow) kinds of uncoiler - manual and hydraulic type. Depending on usage and the coil width and weight, there are several kinds of uncoiler with ...
 
Auto-Stacker

Auto-Stacker
Description The auto-stacker is to pile the panel products up and to transfer them. Using vacuum pad, machine holds and transfers panels to packing place. The auto stacker for sandwich panel line has a turning ...
 
 
Slitting machine

Slitting machine
Description Slitting machine is to cut steel sheet in length. Using Max. 12 knives, the machine can cut the loaded steel sheet and recoil. Depending on coil width, thickness and number of strap, the machine has ...
 
Shearing Machine

Shearing Machine
Description Shearing machine is to cut 0.3 ~ 2.3mm thick steel sheet in required length and stack. The machine is designed in accordance with the coil thickness and width. In accordance with customer's requests, ...
 
 
Roll Forming Machine - Floor Deck Panel

Roll Forming Machine - Floor Deck Panel
Features Capacity : 20M/mm Coil Width : 914~1,250mm Coil Thickness : 0.3~3.0mm With plenty of experience, we are the finest manufacturer of roll forming machine. We have supplied high performance and error-free roll ...
 
2-Side Forming Machine

2-Side Forming Machine
Features Capacity : 16M/mm Coil Width : Max. 1,020mm Coil Thickness : 0.45~0.5mm This is to fold both right and left edges. To produce different kinds of accessory panels for construction, this machine is widely ...
 
 
Guard Rail Forming Machine

Guard Rail Forming Machine
This is designed to produce Guard Rail that is used as a safety device for driving way. This consists of an uncoiler, a roll forming machine, a cutting machine and run out ...
 
Roof and Wall Panel Forming Machine

Roof and Wall Panel Forming Machine
Features Capacity : Max. 20M/min Coil Thickness : 0.5~0.8mm Width : 914~1,250mm The machine shown in the illustration is to produce roof and wall panel. When the steel sheet is passing through the rollers, it has ...
 
 
Deck Plate Panel Forming Machine

Deck Plate Panel Forming Machine
Features Capacity : Max. 16M/min Coil Thickness : 1.0~2.3mm Width : 914~1,250mm This is to shape 1.0 ~ 2.3mm thick steel sheet for floor material. This machine consists of uncoiler(decoiler), roll forming machine, ...
 
Polyurethane Sandwich Panel Line

Polyurethane Sandwich Panel Line
Description This is for manufacturing Poly urethane panels for constructing factories, warehouses and houses. After making a shape of 0.4 ~ 0.6 thick pre-painted steel sheets, it applies poly urethane cut to the ...
 
 
SGP & T-Bending Panel Line

SGP & T-Bending Panel Line
General Description This is for inner partitions for cold and freezing storages and offices. After shaping of 0.4 ~ 0.6 thick pre-painted steel sheets, punching and corner cutting, this bends 4 sides of the ...
 
Polyethylene Panel Line

Polyethylene Panel Line
Description Fixing insulating material to the steel sheet by heating and adhesive, various types of insulation panel can be produced. With automatic temperature control for no scratching or color fading. It includes a ...
 
 
Glass (Mineral) Wool Sandwich Panel Line

Glass (Mineral) Wool Sandwich Panel Line
General Description This is for manufacturing fireproof Glass (Mineral) Wool panels material for constructing factories and warehouses. After making a shape of 0.4 ~ 0.6 thick pre-painted steel sheets, these are fixed ...
 
EPS Sandwich Panel Line

EPS Sandwich Panel Line
Description This is for manufacturing EPS panels to construct factories, warehouses and houses. After making a shape of 0.4 ~ 0.6 thick pre-painted steel sheets, these are fixed to EPS and cut. Panels for wall and ...
 
모두선택  | 선택해제
선택하시고 클릭하세요.
1