신규 상품 정보
상품 정보 등록
  홈 > 마켓플레이스 > 상품정보  > 공구,기계류  > 수동공구,DIY공구 >

Tianjin Junling Metal CO.,LTD
Tianjin Junling Metal CO.,LTD (중국) 회사에서 287개의 상품을 찾았습니다. (181~200 / 총 287 건)   
 
선택하시고 클릭하세요.
모두선택  |  선택해제
 
Machine Screw 6*30

Machine Screw 6*30
1.생산제품(Product) - 머신 나사 (Machine Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 니켈도금(Nickel Plating) : ...
 
Machine Screw 6*20

Machine Screw 6*20
1.생산제품(Product) - 머신 나사 (Machine Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 니켈도금(Nickel Plating) : ...
 
 
Flat Screw 5*45

Flat Screw 5*45
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
Flat Screw 5/32*23

Flat Screw 5/32*23
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
 
Flat Screw 4*60

Flat Screw 4*60
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
Flat Screw 4*40

Flat Screw 4*40
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
 
Flat Screw 4*38

Flat Screw 4*38
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
Flat Screw 4*16

Flat Screw 4*16
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
 
Flat Screw 4*10

Flat Screw 4*10
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
Flat Screw 4*12

Flat Screw 4*12
1.생산제품(Product) - 접시머리 나사 (Flat Screw) 2.재질(Screw Materials) - 철(Steel) : SWCH 10A,15A,18A,22A 3.표면처리방법(Surface Treatment) - 아연도금(Zinc Plating) : White, Other ...
 
 
산업용 나이프

산업용 나이프
산업용 나이프 전문 업체 slitter knife / circular knife / score(core)knife / tungsten carbide knife / 등등... 테이프 / 지관 / 필름 / 벽지 / 은박지 / 동박 / 종이컵 이외에 모든 재단에 ...
 
J76

J76
Scope: Cutting ø70mm copper cable or ø70mm reinforced cable Warnings: 1.Do not cut steel wire. 2.It can be used in the sea,clean with water and lubricate. 3.Knives can resharpen or replace. 4.If cutting ...
 
 
KBX45

KBX45
Scope: Stripping the end of calbe insulation isolation below ø45mm. Warnings: 1.Stripping thickness can be adjusted 2.Suitbable for stripping the end and the middle of conducting wire and cable. 3.Do not keep ...
 
BX40

BX40
Scope: Stripping Ø15-40mm the end of cable insulation and semiconductor isolation. Warnings: 1.Stripping thickness can be adjusted. 2.Do not keep knives reach Cu-Al core during stripping. 3.Knives can resharpen ...
 
 
GBX720

GBX720
Scope: Stripping aluminium calbe around steel core for ACSR from 240mm2 to 720mm2(ø20-40mm). Warnings: 1.Stripping thickness can be adjusted 2.Suitbable for stripping the end and the middle of conducting wire and ...
 
TBJ-1

TBJ-1
Scope: Cutting iron plate and corrugated plate below thickness 1.5mm. Warnings: Do not cutting steel ...
 
 
DT-3

DT-3
Scope: Cutting ø55mm PVC,PE,PB pipe and rubber pipe. Warnings: Do not cut steel ...
 
DDQ30(DDQ2)

DDQ30(DDQ2)
Scope: Cutting ACSR below ø30mm or 400mm2 copper cable Warnings: 1.DDQ30 mainly used for cutting ACSR and copper cable. 2.Knives can ...
 
 
J130 Cable Cutter

J130 Cable Cutter
For cutting off copper & aluminium in armoured cable with a diameter smaller than ...
 
J100 Cable Cutter

J100 Cable Cutter
For cutting off copper & aluminium in armoured cable which is smaller than 3×300 mm2 or with a diameter samller than 100 ...
 
모두선택  | 선택해제
선택하시고 클릭하세요.
1  2  3  4  5  6  7  8  9  10  11  12  13  14  15